Hardware image

MJB V1.2 Board

Our new Magic Jelly Bean GOai board Featuring the GW2AR-18-QN88P FPGA

  • 20,736-LUT4 FPGA
  • On-Chip Block-SRAM 828Kbit
  • 10x10mm QFN88 FPGA Package
PCB
  • HDMI RX and HDMI TX
  • Internal 2x32Mbit PSRAM
  • On-Board 64Mbit SPI-FLASH
  • LED Indicator
  • OLED Display Connector
  • USB Programmer
  • DC5V è 3V、2.8V、2.5V、1.8V、1.2V、1.0V
  • PCB Size: 6cm x 6.6cm

Buy Now Github Reddit
Hardware image



MiniStar Nano

Enables a seamless connection between programmable logic devices and embedded processors. It is compatible with a wide range of peripheral device standards, significantly reduces user costs, and can be widely used in industrial, communication, servo drive, and other fields.

Low Cost FPGA+MCU Embedded Computer Board

  • GOWIN GW1NS-4C µSoC FPGA
    • 4.6K LUT FPGA Fabric
    • ARM Cortex-M3 Embedded MCU
    • Embedded 256Kbit Flash
    • 64Mbit HyperRAM
  • High Speed Flex Connectors
    • Selectable IO Voltages
  • J-LINK Debugger Header
  • 27Mhz Mems Oscillator
  • 64-Mbit external SPI Flash
  • Power LED
  • 26mm x 17.9mm

Buy Now Github Reddit
Hardware image



U2X Programming Dongle

The U2X Programming dongle is developed to bridge USB to JTAG, SPI, I2C, and GPIO. This new USB solution can be used to program and communicate with FPGAs, MCUs. And other devices. Control pins for different interfaces:

  • JTAG
  • SPI
  • I2C
  • GPIO

Buy Now Github Reddit
Hardware image

MiniStar Board

Enables a seamless connection between programmable logic devices and embedded processors. It is compatible with a wide range of peripheral device standards, significantly reduces user costs, and can be widely used in industrial, communication, servo drive, and other fields.

Low Cost FPGA+MCU Embedded Computer Board

  • GOWIN GW1NS-4C µSoC FPGA
    • 4.6K LUT FPGA Fabric
    • ARM Cortex-M3 Embedded MCU
    • Embedded 256Kbit Flash
    • 64Mbit HyperRAM
  • High Speed Flex Connectors
    • Selectable IO Voltages
  • USB-C to JTAG Programmer
  • J-LINK Debugger Header
  • 27Mhz Mems Oscillator
  • 64-Mbit external SPI Flash
  • 2 - Push Buttons, 2 – User LEDs
  • Power LED

Buy Now Github Reddit
Hardware image



MJB Camera

The MJB Camera Board will allow you to use a OV2640 Camera Module with the MJB Board. The OV2640 is a SOC sensor that has an on-chip ISP which can do auto-exposure, auto-white balance, all in a small package. Ideal for creating great images at a miniature cost.

Buy Now Github Reddit
Hardware image



MJB Microphone

This tiny, low power microphone comes with an I2S digital output which allows direct interconnect with our MJB board. Ideal for smaller devices where size and power consumption are a constraint.

Buy Now Github Reddit
Hardware image



MJB Accelerometer

The LIS2DH12 accelerometer comes with 8 LEDs and is fully compatible with your MJB board. Accelerometers are devices that measure the change in velocity and sense vibrations within systems. A common use for accelerometers for handheld devices would be rotating a display once sensing the physical change of orientation. The LIS2DH12 accelerometer comes with 8 LEDs

Buy Now Github Reddit